Welcome to
TRATIKA COMPUTER ( TRATIKA INDONESIA)

Free Member
TRATIKA COMPUTER ( TRATIKA INDONESIA)
TRATIKA COMPUTER ( TRATIKA INDONESIA)
Indonesia
  • Products Catalog

    UPS AROS

    UPS AROS

    Price:
    8000000
    Quantity Order:
    Origin:
    Italy
    Payment Method:
    Telegraphic Transfer (T/T)
    Pack. & Delivery:
    LOKAL

    Specification :

    Various Any Kind of UPS AROS Product Such As namely :

    1.Rapido 350 - 550 VA

    The RAPIDO range is the ideal solution for small office and home systems ( SOHO) requiring over voltage and mains failure protection. The compactness, versatility ( a push-button switch with LED-based mimic panel and user-replaceable batteries) and functionality of the RAPIDO allow it to easily fit into any small office and home environment. When the mains fails, connected loads are powered with a pseudo sine wave supply from the inverter. For additional security users can download a version of the Watch& Save 3000 UPS monitoring and control software.

    2. PC Planet 400 - 650 VA

    The PC PLANET series includes the 400-600-800VA models and uses digital
    technology. The load is powered from the mains through an AVR to stabilise brownout,
    sag and surge voltages, and EMI filters to suppress spikes and transients. When the
    mains fails, the load is powered by the inverter with a pseudo sinewave to provide
    sufficient runtime for computer system shutdown using the Watch& Save 3000
    software supplied as standard.

    3. Sentinel 6 700 - 3000 VA

    The SENTINEL 6 series includes the 700- 1000-1500-2000-3000VA models and uses
    double conversion technology ( VFI) . The load is powered continuously by the inverter
    with an EMI filtered, stabilised and regulated sinewave supply. The input and output
    EMI filters considerably increase the immunity of the load to mains disturbances and
    surges, even on bypass. The UPS can power the load for long periods ( using battery
    extension packs) or provide sufficient runtime to allow shutdown of the protected
    systems using the Watch& Save 3000 software, supplied as standard. For outstanding
    power protection and communication SENTINEL 6 is the best solution for sensitive
    and â mission-criticalâ applications.

    4. Sentinel XR 3, 3 - 10 kVA

    SENTINEL XR is the best solution for protecting medium sized networking
    applications which require the highest possible levels of reliability. The UPS is
    designed to support a wide applications from IT to security. SENTINEL XR is unique
    in that the UPS can be placed directly onto the floor or mounted in 19â rack mount
    cabinets. The range is available in 3300-4000-5000-6000- 8000-10000VA models. The
    UPS is primarily an on-line double-conversion ( VFI) technology system with further
    selectable operating modes that can configure the UPS to protect applications
    including emergency lighting, security and medical systems.

    5. Sentinel XR Plus 5 - 10 kVA

    Sentinel XR Plus is the ideal solution for powering vital mission critical, sensitive
    loads such as electro-medical security applications in order to guarantee maximum
    reliability and availability. The series includes 5kVA-6kVA single/ single phase and
    6.5kVA-8kVA- 10kVA single/ single phase and three/ single phase models and uses
    double conversion on-line technology ( VFI) . The load is powered constantly by the
    inverter which supplies filtered, stabilised and regulated sinewave voltage. Moreover,
    the input and output filters increase the immunity of the load against mains power
    disturbances and lightning strikes. Sentinel XR Plus is without doubt one of the best
    UPS systems on the market today thanks to the technology used, the features
    ( selectable Economy Mode and Smart Active Mode) and the diagnostics offered
    ( custom LCD display, RS232 and USB interfaces complete with Watch& Save 3000
    software, EPO contact and slots for optional interface boards) .

    6. Flexus 10 - 120 kVA

    Flexus is ideal for the protection of critical information and telecommunications
    networks which cannot run the risk of being powered from a power quality electrical
    supply. The Flexus series is available in 10-12- 15-20 kVA three-phase or single-phase
    input and single-phase output models, and 10-12-15-20-30-40-100-120 kVA three-
    phase input and output models, with double conversion on-line technology according
    to the VFI-SS-111 classification, as defined by the IEC EN 62040-3 standard. Flexus
    has been designed and manufactured using state-of-the-art technologies in order to
    deliver maximum protection for critical users, a zero impact on the mains power
    supply and a high operating efficiency. The high level of flexibility at the design stage
    means that there is full compatibility both with three-phase power and with single-
    phase sources, thus eliminating any critical factors in the connection between UPS and
    system.

    7. Sentry Multistandard 10 - 80 kVA

    SENTRY MULTISTANDARD provides maximum protection for critical data
    processing networks and security applications, thanks to its advanced design,
    selectable operating modes and communications capabilities. Operating modes
    include: On-line, Economy, Smart-Active, Standby/ Off and Voltage Stabilisation.
    Standard communications features include a front panel LCD with 128 potential
    messages, RS232 interfaces, EPO input, communications interface slot and
    Watch& Save 3000 management software. The SENTRY MULTISTANDARD series
    includes 60-80 kVA three-phase models, and uses on-line double conversion
    technology ( VFI) . The load is powered continuously by the inverter with a filtered,
    stabilised and regulated sinewave supply. The input and output filters considerably
    increase the immunity of the load to mains disturbances and surges, even on bypass.

    8. Sentry HPS 8 - 100 kVA

    SENTRY HPS HM/ HT provides maximum protection for vital â missioncriticalâ
    networks, security applications ( electro-medical) and industrial applications thanks to
    its outstanding mechanical and electrical design. The load is powered continuously by
    the inverter with a filtered, stabilised and regulated sinewave supply. The input and
    output EMI filters considerably increase the immunity of the load to mains
    disturbances and surges. The SENTRY HPS HM/ HT series uses on-line double
    conversion technology ( VFI) with an isolation transformer on the inverter output.
    SENTRY HPS HM/ HT is supplied with Watch& Save 3000 software as standard and
    can be remotely monitored using the PowerNetGuard system from anywhere in the
    world. Additional battery extension packs allow the standard battery runtime to be
    extended up to several hours.

    9. Sentry MPS 30 - 800 kVA

    SENTRY MPS is an on-line double conversion UPS ( VFI SS 111 in accordance with IEC EN 62040-3) with a transformer isolated inverter. With a compact footprint and high power quality output, SENTRY MPS is designed to protect â mission criticalâ
    applications including data processing, telecommunications, industrial processes, security and electro-medical systems. SENTRY MPS is suitable for a wide range of applications including IT and the most demanding industrial environments suitable for power capacitive loads such as blade servers, without any reduction of the active power, from 0, 8 lagging to 0, 9 leading. With a broad of accessories and options, complex configurations and system architectures can be achieved to guarantee maximum power availability and the option to add new UPS without interruption to existing users. Using the AROS UPS Group Synchroniser ( USG) and Parallel Systems Joiner ( PSJ)
    sophisticated inter group parallel and redundant systems can be achieved to provide the highest possible levels of resilience and availability.

    10 Sentry MPS HP 100 - 250 kVA

    Thanks to the double conversion on-line technology achieved entirely with IGBT and DSP ( Digital Signal Processor) control, the Sentry MPS-HP series guarantees maximum protection as well as high quality power for any type of IT and industrial load. It is especially suited for mission critical applications and is classed VFI SS 111 ( Voltage and Frequency Independent) in compliance with IEC EN 62040-3 standards. This series, available in 100 to 250kVA models, has been designed using a new configuration that includes an IGBT rectifier with sinusoidal input current in place of the traditional thyristor rectifier.

    If you need Assistance, Please contact Us :
    TRATIKA COMPUTER ( TRATIKA INDONESIA GROUP)
    http: / / www.tratikacomputer.webs.com
    Email : tratika.indonesia@ gmail.com



You have [3] new inquiries.
Go to Member Menu

Home - Trade List - Product List - Inquiry List - Cooperation List - Company List
Copyright © 2024 Indotrade.co. All Rights Reserved.